IKON AUDIO STEREO 60.1 INTEGRATED VALVE AMPLIFIER

• Manufactured in 2006
• This item is in very good condition (8/10)
• The serial number is S60110
• Unfortunately we do not have the original packaging but we will make sure it is safely packed before it is sent out.
• The original retail price was £1,700

Technical Specification

• Class A, all Triode front end
• Output circuit Ultralinear or Triode switchable
• 4x KT88/6550 precisely matched for best performance
• 2x 12AX7 (ECC83) first stage valves
• 2x 12AT7 (ECC81) output driver valves
• HT delay to prevent cathode stripping (optional)
• 2x 65w RMS continuous per channel
• 2x 40 Watts RMS in Triode mode
• Signal to noise level -90db
• Freq response better than 20hz-20kHz +0 – 0.5db at all powers
• Total harmonic distortion typically less than 0.02% 1khz
• Suitable for 4 to 16ohm loudspeakers
• Japanese steel EI transformers with low oxygen copper
• High quality 2W metal film, & wire-wound resistors
• Blue LED mains indicator
• Polypropylene audio capacitors
• Silver TEFLON audio cable
• Custom hand wound output transformers
• Ceramic valve holders for minimum leakage
• Centre tapped heater circuit for minimum hum
• ‘Soft start’ device incorporated
• Gold plated Input & speaker terminals
• Four line inputs
• Tape monitor circuit
• 350mv input sensitivity.
• 230/240volts 200watts typ, 500w max. 3A AS fuse C E certified
• 460W, 400D, 250H, 33kg

Resources & Reviews 

Manufacturers Website - https://iconaudio.com/stereo-60-1

If you have any questions don't hesitate to reach out to us!

Please note:  Unfortunately due to the fact we don't have the original boxes we cannot ship the item outside of the UK. For domestic delivery we will make sure the item is packed safely before it is sent out. Please refer to our shipping policy for more detail.