A reference loudspeaker that stands eight inches tall
Audience ClairAudient 1+1 V5. Exclusive to The HiFi Consultants in the UK.
Big-system sound from a personal monitor
The ClairAudient 1+1 V5 is built for desks, smaller rooms and any system where space matters. It images like a much larger loudspeaker and reaches down to 55Hz from a cabinet you can lift with one hand.
Why it sounds different
-
One driver, no hand-over
Most loudspeakers split the music between a tweeter and a mid-range driver through a crossover. The 1+1 V5 uses Audience's A3S2-16 full-range driver instead, so voices and instruments stay seamless through the range where the ear is most sensitive.
-
Front and back
An identical driver on the rear baffle, wired in phase, makes the 1+1 V5 a bipole. The soundstage is open and three-dimensional, reaching well beyond the cabinets, and the opposed drivers cancel cabinet vibration.
-
Bass from the sides
Two side-firing passive radiators extend the response down to 55Hz. Bass is quick and well defined, which is what lets a cabinet this small sit comfortably in a serious system.
Hi-Fi+ Editor's Choice 2026
What the press says
“…one of the best loudspeakers money can buy.”
Alan Sircom, Hi-Fi+
“The V5 is a game-changer for the ClairAudient 1+1.”
The Audio Beatnik
Also reviewed by Part-Time Audiophile and Enjoy the Music.
Where it works best
- On a desk: a near-field system with proper imaging and scale.
- In a smaller room: a study, a flat or a second system, where a full-size loudspeaker would overpower the space.
- On stands: out in the room on 71cm (28in) stands, where the bipole design has space to breathe.
The 1+1 V5 is an 8 ohm, 87dB design, recommended for amplifiers of 15 to 60 watts. Tell us what you are using and we will tell you plainly whether it is a good match.
Home demonstrations by arrangement
Hear it in your own system
A loudspeaker this small at this price has to be heard to be believed, so we keep a demonstration pair for exactly that purpose.
Get in touch and tell us about your system, your room and how you listen. We will arrange a home demonstration to suit, so you can hear the 1+1 V5 with your own music and your own equipment before you decide.
The detail
Specifications
- System: dual full-range drivers in bipole configuration with two side-firing passive radiators
- Frequency response: 55Hz to 20kHz ±3dB
- Impedance: 8 ohms
- Sensitivity (in room): 87dB / 1W / 1m
- Recommended amplifier power: 15 to 60 watts
- Power handling: 80 watts per speaker
- Input terminals: KLEI 5-way binding posts
- Dimensions (H x W x D): 20.3 x 15.2 x 24.8cm (8 x 6 x 9.75in)
- Weight: 3.3kg (7 lb 4 oz) each
- Recommended stand height: 71cm (28in)
- Finish: black with lacquered rosewood side cheeks
Design features
- A3S2-16 full-range drivers with a patented dual-gap motor, 1-inch voice coil and curvilinear titanium cone
- Non-parallel enclosure with angled front and rear baffles to reduce standing waves
- Bipole radiation from identical front and rear drivers
- 40Hz high-pass filter to protect the drivers from infrasonic excursion
- Voicing circuit using an Audience Auri-Cap XO film capacitor
- KLEI binding posts and Audience mono-crystal internal wiring
Ordering and lead time
New pairs are ordered from Audience, with a 2 to 3 week lead time.
Audience
Audience ClairAudient 1+1 V5 Loudspeakers
Complete the system
The 1+1 V5 is wired internally with Audience's own mono-crystal cable, so Audience cabling is a natural partner. We hold demonstration cables you can try alongside the loudspeakers.